Skip to Main Content
Loading
Loading
About Us
Customers
Your Water
Builders/Developers
How Do I?
Home
FAQs
Search
All categories
Backflow Assembly Testing & Cross Connection
Commissioners
CP - Functionality Test
Customer Service
Fluoride
Human Resources
Projects
Using Water Wisely
Wastewater Field Operations
Water Operations
Water Supply & Water Quality
Categories
All Categories
Backflow Assembly Testing & Cross Connection
Commissioners
CP - Functionality Test
Customer Service
Fluoride
Human Resources
Projects
Using Water Wisely
Wastewater Field Operations
Water Operations
Water Supply & Water Quality
Where are cross connections found?
A cross connection exists wherever the potable water supply is connected to a plumbing fixture. However, most new fixtures have built-in protections to avoid a cross connection. Commonly found cross connections can occur in hose spigots, irrigation sprinkler systems, boilers, swimming pools, fire sprinkler systems and auxiliary water supplies.
▼
Backflow Assembly Testing & Cross Connection
Show All Answers
1.
Who can test my backflow assembly?
Testing can only be performed by a Washington State Department of Health certified backflow tester. A copy of the test report must be sent to the District and a copy should be maintained in your personal files.
2.
How often must I have my backflow assembly tested?
All backflow assemblies must be tested upon installation, after any repairs, if moved to a new location, and annually thereafter.
3.
What is a cross connection?
A cross connection is a point in the plumbing system where the potable (drinkable) water supply is connected directly or can be connected directly to a non-potable source.
4.
Where are cross connections found?
A cross connection exists wherever the potable water supply is connected to a plumbing fixture. However, most new fixtures have built-in protections to avoid a cross connection. Commonly found cross connections can occur in hose spigots, irrigation sprinkler systems, boilers, swimming pools, fire sprinkler systems and auxiliary water supplies.
5.
What causes a cross connection?
A cross connection may occur due to backflow caused by unprotected fixtures that are subjected to backsiphonage or backpressure. Backsiphonage is caused by a negative or reduced pressure in the supply line to a facility or plumbing fixture. Backpressure may cause backflow to occur whenever a potable water system is connected to another system at a higher pressure.
Live Edit
Arrow Left
Arrow Right
[]
Slideshow Left Arrow
Slideshow Right Arrow